Store
Pumps
Armstrong H-67-1PH AB In-Line Circulator Pump (116512-133)
Armstrong H-67-1PH AB In-Line Circulator Pump (116512-133) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong H-67-1PH AB In-Line Circulator Pump (116512-133) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong H-67-1PH BF In-Line Circulator Pump (116511-132) Specifications: AB = All bronze / For drinking water Construction: o Volute - Bronze o Impeller - Cast Bronze o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure - 175 psi (1207 kPa) Pump and Motor Data: o Flange size (NPT) - 2 o HP - 1 o Volts & phase - 115/230 Volt 1 phase
Armstrong H-67-3PH AB In-Line Circulator Pump (116516-137)
Armstrong H-67-3PH AB In-Line Circulator Pump (116516-137) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong H-67-3PH AB In-Line Circulator Pump (116516-137) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong H-67-3PH AB In-Line Circulator Pump (116516-137) Specifications: AB = All bronze / For drinking water Construction: o Volute - Brass o Impeller - Cast Bronze o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure - 175 psi (1207 kPa) Pump and Motor Data: o Flange size (NPT) - 2 o HP - 1 o Volts & phase - 208-230/460 or 575 Volt 3 phase
Armstrong H-66-3PH AB In-Line Circulator Pump (116504-137)
Armstrong H-66-3PH AB In-Line Circulator Pump (116504-137) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong H-66-3PH AB In-Line Circulator Pump (116504-137) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong H-66-3PH AB In-Line Circulator Pump (116504-137) Specifications: AB = All bronze / For drinking water Construction: o Volute - Bronze o Impeller - Cast Bronze o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure - 175 psi (1207 kPa) Pump and Motor Data: o Flange size (NPT) - 2 o HP - 3/4 o Volts & phase - 208-230/460 or 575 Volt 3 phase
Armstrong H-65-1PH AB In-Line Circulator Pump (116488-133)
Armstrong H-65-1PH AB In-Line Circulator Pump (116488-133) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong H-65-1PH AB In-Line Circulator Pump (116488-133) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong H-65-1PH BF In-Line Circulator Pump (116487-132) Specifications: AB = All bronze / For drinking water Construction: o Volute - Bronze o Impeller - Cast Bronze o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure - 175 psi (1207 kPa) Pump and Motor Data: o Flange size (NPT) - 1-1/2 o HP - 1 o Volts & phase - 115/230 Volt 1 phase
Armstrong H-66-1PH AB In-Line Circulator Pump (116500-133)
Armstrong H-66-1PH AB In-Line Circulator Pump (116500-133) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong H-66-1PH AB In-Line Circulator Pump (116500-133) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong H-66-1PH AB In-Line Circulator Pump (116500-133) Specifications: AB = All bronze / For drinking water Construction: o Volute - Bronze o Impeller - Cast Bronze o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure - 175 psi (1207 kPa) Pump and Motor Data: o Flange size (NPT) - 2 o HP - 3/4 o Volts & phase - 115/230 Volt 1 phase
Armstrong H-64-1PH AB In-Line Circulator Pump (116476-133)
Armstrong H-64-1PH AB In-Line Circulator Pump (116476-133) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong H-64-1PH AB In-Line Circulator Pump (116476-133) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong H-64-1PH AB In-Line Circulator Pump (116476-133) Specifications: AB = All bronze / For drinking water Construction: o Volute - Bronze o Impeller - Cast Bronze o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure - 175 psi (1207 kPa) Pump and Motor Data: o Flange size (NPT) - 1-1/2 o HP - 3/4 o Volts & phase - 115/230 Volt 1 phase
Armstrong H-63-1PH AB In-Line Circulator Pump (116464-133)
Armstrong H-63-1PH AB In-Line Circulator Pump (116464-133) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong H-63-1PH AB In-Line Circulator Pump (116464-133) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong H-63-1PH AB In-Line Circulator Pump (116464-133) Specifications: AB = All bronze / For drinking water Construction: o Volute - Bronze o Impeller - Cast Bronze o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure - 175 psi (1207 kPa) Pump and Motor Data: o Flange size (NPT) - 1-1/2 o HP - 1/2 o Volts & phase - 115/230 Volt 1 phase
Armstrong S-46 AB In-Line Circulator Pump (174037-143)
Armstrong S-46 AB In-Line Circulator Pump (174037-143) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong S-46 AB In-Line Circulator Pump (174037-143) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong S-25 BF In-Line Circulator Pump (174031-013): AB = All bronze / For drinking water Construction: o Volute - Bronze o Impeller - Non-Ferrous o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure 125 psi - (862 kPa) Pump and Motor Data: o Flange size (NPT) - 3 o HP - 1/3 o Volts & phase - 115 Volt 1 phase
Armstrong S-69-1PH BF In-Line Circulator Pump (116531-132)
Armstrong S-69-1PH BF In-Line Circulator Pump (116531-132) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong S-69-1PH BF In-Line Circulator Pump (116531-132) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong S-57-3PH BF In-Line Circulator Pump (106285-136) Specifications: BF = Bronze Fitted (Cast Iron) / General heating & circulating Construction: o Volute - Cast Iron o Impeller - Brass-Stamped o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure 125 psi - (862 kPa) Pump and Motor Data: o Flange size (NPT) - 3 o HP - 1 o Volts & phase - 115/230 Volt 1 phase
Armstrong H-54-1PH AB In-Line Circulator Pump (116452-133)
Armstrong H-54-1PH AB In-Line Circulator Pump (116452-133) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong H-54-1PH AB In-Line Circulator Pump (116452-133) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong H-54-1PH AB In-Line Circulator Pump (116452-133) Specifications: AB = All bronze / For drinking water Construction: o Volute - Bronze o Impeller - Non-Ferrous o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure - 175 psi (1207 kPa) Pump and Motor Data: o Flange size (NPT) - 2 o HP - 3/4 o Volts & phase - 115/230 Volt 1 phase
Little Giant APS-115 1/2 HP - Sure Sump Auxiliary Power System (513400)
Little Giant APS-115 1/2 HP - Sure Sump Auxiliary Power System (513400) Fully automatic Auxiliary Power system (APS) is comprised of a power unit and battery enclosure which holds two 12 VDC batteries (not included). the two 12 VDC, 120 Amp-Hour (deep cycle, lead acid) marine type batteries connected in series will provide 24 VDC. The advanced charging system monitors and maintains battery voltage and converts the 24 VDC power to 115 VAC to provide power to the sump,, sewage or effluent pump(s) in the even of a power outage. The pump(s) simply plug into power unit and power unit plugs into standard 115v outlet; no direct wiring is involved. Max Output: 15 amps with a service factor of .80 (12 amps) and a total of 1/2 hp or 1440 watts. LED indicator lights: Inverter Light (in use) and Charge Light. Little Giant APS-115 1/2 HP - Sure Sump Auxiliary Power System (513400) Features: Fully Automatic Enclosure holds two 12 VDC batteries (not included) Converts 24 VDC power to 115 VAC Plugs into standard 115v outlet 15 amps Max Output with a service factor of .80 (12 amps) Total of 1/2 HP or 1440 watts LED indicator lights Little Giant APS-115 1/2 HP - Sure Sump Auxiliary Power System (513400) Specification: Horsepower: 1/2 Cord Lenght: 9' Shut Off: Voltage: 115 Hertz: 60 Amps: 15 Watts: 1440 Weight: 104
Armstrong H-53-1PH AB In-Line Circulator Pump (116440-133)
Armstrong H-53-1PH AB In-Line Circulator Pump (116440-133) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong H-53-1PH AB In-Line Circulator Pump (116440-133) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong H-53-1PH BF In-Line Circulator Pump (116439-132) Specifications: AB = All bronze / For drinking wate Construction: o Volute - Bronze o Impeller - Non-Ferrous o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure - 175 psi (1207 kPa) Pump and Motor Data: o Flange size (NPT) - 1-1/2 o HP - 1/2 o Volts & phase - 115/230 Volt 1 phase
Armstrong H-67-1PH BF In-Line Circulator Pump (116511-132)
Armstrong H-67-1PH BF In-Line Circulator Pump (116511-132) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong H-67-1PH BF In-Line Circulator Pump (116511-132) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong H-67-1PH BF In-Line Circulator Pump (116511-132) Specifications: BF = Bronze Fitted (Cast Iron) / General heating & circulating Construction: o Volute - Cast Iron o Impeller - Cast Bronze o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure - 175 psi (1207 kPa) Pump and Motor Data: o Flange size (NPT) - 2 o HP - 1 o Volts & phase - 115/230 Volt 1 phase
Armstrong H-66-1PH BF In-Line Circulator Pump (116499-132)
Armstrong H-66-1PH BF In-Line Circulator Pump (116499-132) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong H-66-1PH BF In-Line Circulator Pump (116499-132) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong H-66-1PH BF In-Line Circulator Pump (116499-132) Specifications: BF = Bronze Fitted (Cast Iron) / General heating & circulating Construction: o Volute - Cast Iron o Impeller - Cast Bronze o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure - 175 psi (1207 kPa) Pump and Motor Data: o Flange size (NPT) - 2 o HP - 3/4 o Volts & phase - 115/230 Volt 1 phase
Armstrong H-52 AB In-Line Circulator Pump (116436-133)
Armstrong H-52 AB In-Line Circulator Pump (116436-133) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong H-52 AB In-Line Circulator Pump (116436-133) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong H-52 BF In-Line Circulator Pump (116435-132) Specifications: AB = All bronze / For drinking water Construction: o Volute - Bronze o Impeller - Non-Ferrous o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure - 175 psi (1207 kPa) Pump and Motor Data: o Flange size (NPT) - 1-1/4 o HP - 1/3 o Volts & phase - 115 Volt 1 phase
Armstrong H-65-1PH BF In-Line Circulator Pump (116487-132)
Armstrong H-65-1PH BF In-Line Circulator Pump (116487-132) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong H-65-1PH BF In-Line Circulator Pump (116487-132) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong H-65-1PH BF In-Line Circulator Pump (116487-132) Specifications: BF = Bronze Fitted (Cast Iron) / General heating & circulating Construction: o Volute - Cast Iron o Impeller - Cast Bronze o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure - 175 psi (1207 kPa) Pump and Motor Data: o Flange size (NPT) - 1-1/2 o HP - 1 o Volts & phase - 115/230 Volt 1 phase
Armstrong H-67-3PH BF In-Line Circulator Pump (116515-136)
Armstrong H-67-3PH BF In-Line Circulator Pump (116515-136) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong H-67-3PH BF In-Line Circulator Pump (116515-136) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong H-67-3PH BF In-Line Circulator Pump (116515-136) Specifications: BF = Bronze Fitted (Cast Iron) / General heating & circulating Construction: o Volute - Cast Iron o Impeller - Cast Bronze o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure - 175 psi (1207 kPa) Pump and Motor Data: o Flange size (NPT) - 2 o HP - 1 o Volts & phase - 208-230/460 or 575 Volt 3 phase
Armstrong S-45 AB In-Line Circulator Pump (174036-143)
Armstrong S-45 AB In-Line Circulator Pump (174036-143) Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction. Armstrong S-45 AB In-Line Circulator Pump (174036-143) Features: Standard Three-Piece Design Radially-Split Body Oversized Shaft Centrifugal Impeller Positive Mechanical Seal Modular Construction Armstrong S-25 BF In-Line Circulator Pump (174031-013): AB = All bronze / For drinking water Construction: o Volute - Bronze o Impeller - Non-Ferrous o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat Maximum Operating Temp. - 225 F (107 C) Maximum Working Pressure 125 psi - (862 kPa) Pump and Motor Data: o Flange sizes available (NPT) - 2-1/2, 3 o HP - 1/4 o Volts & phase - 115 Volt 1 phase Companion flanges not furnished as standard on S-25, S-45 and H-32. * Flanges not Included
Follow Us!